DRV8825 Support driver moteur pas à pas de DRV8825, courant élevé (soudé)

Fournisseurs Pololu
Référence:  z3302
Disponibilité du produit:   No stock
Prix ​​de vente9,50 CHF

This is a bulk-packaged version of the DRV8825 Stepper Motor Driver Carrier that ships with 0.1″-pitch male header pins installed as shown in the main product picture, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard.

DRV8825 Stepper Motor Driver Carrier: this breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. This board ships with 0.1″ male header pins included but not soldered in.

Size: 0.6″ × 0.8″
Weight: 2.7 g

General specifications
Minimum operating voltage: 8.2 V
Maximum operating voltage: 45 V
Continuous current per phase: 1.5 A1
Maximum current per phase: 2.2 A2
Minimum logic voltage: 2.5 V3
Maximum logic voltage: 5.25 V3
Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
Reverse voltage protection?: N
Bulk packaged: Y
Header pins soldered: Y

1Without a heat sink or forced air flow.
2With sufficient additional cooling.
3This driver works with 2.5 V to 5.25 V logic. It does not take an external logic power supply.

File downloads
Texas Instruments DRV8825 stepper motor driver datasheet (1MB pdf)
DRV8824/DRV8825 stepper motor driver carrier schematic diagram (196k pdf) Printable schematic diagram for the DRV8824/DRV8825 stepper motor driver carrier.
Dimension diagram of the DRV8825 Stepper Motor Driver Carrier, High Current (500k pdf)
3D model of the DRV8825 Stepper Motor Driver Carrier, High Current (4MB step)

Recommended links
Video: setting the current limit on Pololu stepper motor driver carriers
Texas Instruments DRV8825 product page Texas Instruments product page for the DRV8825, where you can find the latest datasheet and additional resources.

Distributeur Suisse de


Envoi Suisse
Swiss shipping
Envoi international
International shipping

Heures d'ouverture

ZigoBot à Lausanne

La boutique est ouverte

du Mardi au Vendredi de 10h à 18h

et le Samedi de 10h à 14h.

Rue de la Grotte 4 (sous la place Saint-François) • 1003 Lausanne